TP-Link Network MC110CS Fast Ethernet Media Converter 10/100M 20km

Description Read Before Ordering Description The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINKs 19system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers. Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3x Basic Function Half/Full-Duplex transfer mode for FX port Full Duplex Flow Control (IEEE 802.3x) Half Duplex Flow Control (Backpressure) Extends fiber distance up to 20km Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely Ports 1 100M SC port 1 100M RJ45 port (Auto MDI/MDIX) Network Media 10BASE-T : UTP category 3, 4, 5 cable (maximum 100m), EIA/TIA-568 100 STP (maximum 100m) 100BASE-T : UTP category 5, 5e cable (maximum 100m), EIA/TIA-568 100 STP (maximum 100m) 100BASE-FX : Single-mod Fiber LED Indicators PWR, FDX/Col, Link/Act, SPD Safety and Emission FCC, CE Dimensions View All Close Read Before Orderings Product images are for illustrative purposes only and the final product delivered may vary from the one shown above. In some cases, a product sold may arrive in different packaging than its original retail box. For bulk orders that are packaged together, product manuals or CDs may not always be available for each item. At checkout, the shipping cost is a general estimate which is subject to change depending on size/weight/quantity of ordered goods. Orders that contain end of life (EOL) products that are no longer in production may be replaced by a compatible product with the same FRU number offering same functionality. Refurbished printers may not have full ink cartridges or laser toners. Once an order is processed at our warehouse, it cannot be cancelled. A returned order will likely incur a restocking fee. See RMA page for details about restocking fees. Please note if you are concerned about any of the above conditions or have any question at all, we highly recommend that you contact us on [email protected] or call 425-615-6227 before placing an order. View All Close